- 35 -
Installation Of The TFT TV To The Wall (optional)
1-
To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1).
Unscrew the 4 screws (M4 x 6) that attach the foot assembly to the TFT panel and remove
the foot assembly from the TFT panel.
2-
Place the 4 plastic pins to the circular screw holes at the rear of the TFT and screw them to
the TFT panel with 4 (6 x 23) screws.
3-
Decide the place on the wall where the TFT panel would be placed. Fix the
stencil wall
mount (shown in Figure 2) on the wall.
The stencil wall mount is used for placing the wall hangers on the wall, properly.
4-
Level and mark with a pencil the 4 mounting points on each wall hanger.
Drill pilot holes for the plastic anchors (7x30) and then fix the wall hangers with 8 screws
(4 x 30).
5-
Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging
screws at the rear of the TFT panel.
FIGURE 1
FOOT ASSEMBLY
SCREW HOLES
FOR PLASTIC PINS
TFT PANEL
02-ENG-32700-1546 UK-32 INCH TFT-(AU-V4G5)(10 PAGE)(HD-READY)(NEW)-50081920.p65
11.05.2006, 16:05
35
