- 43 -
crease brightness. Press “ ” button to de-
crease brightness. Brightness level can be
adjusted between 0 and 100.
contrast
By pressing “
” / “ ” button, select
con-
trast. " right/left to adjust contrast" is seen
on the screen. Press “ ” button to increase
contrast. Press “ ” button to decrease con-
trast. Contrast level can be adjusted be-
tween 0 and 100.
phase (optional)
This item is not available in the picture
menu when DVI is connected to the TV.
By pressing “
” / “
” button, select
phase.
" right/left to adjust phase" is seen on the
screen. Press “ ” button to increase phase.
Press “ ” button to decrease phase. Phase
level can be adjusted between 0 and 100.
window menu
By pressing “ ” / “
” button, select the third
icon. Window menu appears on the screen.
• If full screen option was selected at the lay-
out menu, the window menu is seen as be-
low.
down for size setting
image size
window
fill all
image size
By pressing “ ” / “ ” button, select
image
size. " right/left to change image size" is
seen on the screen. By pressing “ ” / “
”
button, you can change image size to
fill all
(16:9), zoom, letterbox, subtitle, normal
(4:3), 14:9
and
auto.
You can enter image size directly by press-
ing “
” button.
• If pip option was selected, the window menu
is seen as below.
down for size setting
image size
pip size
pip position
window
auto
10
image size
By pressing “
” / “ ” button, select
image
size. " right/left to change image size" is
seen on the screen. By pressing “
” / “ ”
button, you can change image size to fill all,
normal and
auto
.
You can enter image size directly by press-
ing “
” button.
pip size
By pressing “ ” / “ ” button, select
pip size.
" right/left to adjust PIP size" is seen on the
screen. Press “
” button to increase pip
size. Press “
” button to decrease pip size.
Pip size can be adjusted between 0 and
100.
You can change the pip size directly by
pressing “
” (YELLOW) button.
pip position
By pressing “ ” / “ ” button, select
pip posi-
tion. " right/left to adjust PIP position" is
seen on the screen. By pressing “
” / “ ”
button, you can change the pip position as
left top, right top, middle, left bottom or right
bottom (as seen on the menu above).
You can enter pip position directly by press-
ing "GREEN" button.
02-ENG-32700-1546 UK-32 INCH TFT-(AU-V4G5)(10 PAGE)(HD-READY)(NEW)-50081920.p65
11.05.2006, 16:05
43
