4 - Putting into Operation
Setting up the Balance Kit and the SAG 285/01
Balance Kit Operating Manual, 393278, en, V1.0
4 - 1
4 Putting into Operation
Purpose of This
Chapter
This chapter describes how the Balance Kit is installed and gives instructions on
initial operation.
4.1 Setting up the Balance Kit and the SAG 285/01
4.1.1 Overview
The following figure provides an overview of the Balance Kit and the SAG 285/01
Weighing Module. For a description and the detailed specifications see section
.
Fig. 4-1
Parts of Balance Kit + SAG285/01 (Weighing Cell and Control Unit)
A
B
C
D
E
F
G
H
I
J
L
K
A
Draft shield
B
Ring for evaporation compensation
C
Vessel
D
Centering ring
E
Weighing pan (Mettler)
F
Foot with counternut
G
Adapter plate
H
Weighing cell (Mettler)
I
Connection cable (Mettler)
J
Control unit (Mettler)
K
Connection cable LC-RS9 (Mettler)
L
Power supply (Mettler)
