9
TEC-67231-2 Technical description Prizrak-8xx BT
Using a smartphone as a radio tag (except of Prizrak 800/Style/BT)
The alarm has a feature allowing to use a smartphone
*
as a radio tag. To be able to use your smartphone as a tag, install the mobile
application «Prizrak ID» and register your vehicle. The app may be downloaded from an official app platform depending on the operating system
of your smartphone (IOS or Android). A smartphone that is going to be used as a tag has to be paired with the alarm system via the application
«Prizrak ID». You may use your smartphone as the primary authentication method or as a backup method, e.g., if a radio tag is damaged, lost or
forgotten somewhere. The authentication process using the smartphone is carried out the same way as the authentication with a regular radio tag.
The mobile application has a useful feature: «Prizrak deactivation via smartphone only active when smartphone screen is unlocked» that has
been designed to keep the vehicle protected in case if the smartphone has been stolen. If enabled this feature will prevent authentication using
the stolen smartphone until the smartphone screen is unlocked (e.g., graphical key, fingerprint, Face-ID).
The operating system of a smartphone may cancel activity of some applications (e.g. for energy saving reasons). If the smartphone has quit
out of the app, or you have quit out of the app manually, tap on the Prizrak ID icon to reactivate it. This may not be convenient when AntiHiJack
feature is triggered. It is recommended that you always have a regular radio tag with you.
Pairing a smartphone with the alarm
Pairing is carried out via the mobile application Prizrak ID. The entire pairing (registration) process is accompanied with
pop-up instructions.
A secret Bluetooth code is required in order to pair (register) a smartphone with the alarm. The code is located under the
protective film of the plastic card which is supplied with the alarm.
An installer is not allowed to scratch off the protective film of the Bluetooth code. However, the functionality of the smartphone
tag mode can be checked during the installation process by using the temporary code which allows to register the vehicle in the
mobile application Prizrak ID. The temporary code is valid until the vehicle travels 10 km after the alarm has been fitted to the
vehicle. The “Prizrak ID” app will remind the car owner to delete a smartphone that has been registered with the temporary code.
*
A smartphone must support Bluetooth 4.2 with (BLE) technology. The software version of the smartphone shouldn’t be lower than 6.0 for Android and 12 for IOS.
Pairing (registration) sequence
Download and install the mobile app “Prizrak ID” on your smartphone. All further actions have to be performed inside the car:
1
Switch the vehicle’s ignition ON. Carry out authentication (see page 23).
2
Run the mobile app «Prizrak ID».
3
Give your vehicle a name (any name).
4
Enter Bluetooth code located on the plastic card and tap the button “Continue”.
5
The list of all Key ID tags, Slim tags and smartphones paired with the alarm will appear on the screen (including smartphone tags with
temporary access). You may delete all smartphone tags you are not planning to use in the future. Tap the button «Continue».
6
The Prizrak logo on your smartphone’s screen means that the smartphone has been successfully paired.
Deleting smartphone tags
Proceed to the “List of registered tags” in the mobile app Prizrak ID in order to selectively delete the smart¬phone tags you’re not planning
to use in the future.
In case you don’t use the mobile app “Prizrak ID” and you are not able to view the “List of registered tags” in the app, you may delete all paired
smartphone tags from the alarm’s memory in the special programming menu (see page 38).
