4
Grilling Surface
1.
The cooking grates and radiant glass panel(s) are shipped inside the interior of the grill (see
figure 1). Take the glass panel(s) out of the grill and remove the bubble wrap.
2.
Remove the cooking grates from the metal tray (that they are shipped in). Check to see if
that the clips located on each side of the tray hold the tray firmly in place. If you detect any
movement front to back or side to side, adjust the clips by bending them inward with pliers.
3.
Place the glass panel(s) in the tray with the smooth side up. Place the cooking grates di-
rectly on top of the glass with the open channels facing downward and the taller end of the
grates at the back of the grill.
Warming Rack
If a warming rack is purchased as an option, it can be easily attached to the grill (No hardware
required). Simply hang the warming rack over the back wall of the hood body.
Ignition System
The Patio Series grills use an electric igniter that is completely installed. The
igniter provides a voltage to the spark electrode located at each burner. The
system is battery operated, and the battery must be changed when the spark
appears to weaken. To change the battery, unscrew the igniter button adja-
cent to the viewing hole for each burner and install a new battery with the
positive end of the battery inserted into the igniter. When screwing the igniter
button back onto the grill, take care not to use too much pressure which will
strip the plastic threads.
Freestanding models only
(Required tool: 7/16" open or boxed end wrench or socket, and #3 Phillips head screw driver)
1.
Each side shelf is shipped with two support arms. Remove the truss head screws installed
in the left and right sides of the grill cabinet and put them aside. These will be used to
mount the stainless shelf to the support arms.
2.
Mount the support arms to the side of the cabinet us-
ing the 4 hex head bolts (HW0514) included in the
side shelf hardware package.
3.
After the support arms are securely fastened, place
the shelf over the support arms. Attach the shelf to
the grill body first, then attach the shelf to the support
arms using the truss head screws that you removed
from the sides of the cabinet. Plug the 2 remaining
holes on the edge of the shelf with the finishing plugs (HW1815) included in the hardware
package.
INSTALLING THE RADIANT GLASS PANELS & COOKING GRATES
SIDE SHELF INSTALLATION
Содержание Patio FR series
Страница 2: ...II...
Страница 4: ...IV CROSS SECTION VIEW PATIO SERIES GRILLS FIGURE 1...
