TEC FanControl-GSM v2, Руководство пользователя

Страница: 8 / 15

FanControl‑GSM v2
8
System control
You may control the system by means shown in figure 4.
Via smart voice menu Via SMS With smartphone application
FanControl for iOS and Android
Via factory remote control
Setup by calendar Setup by timer
Figure 4. Means to control the system
System control:
1. Via mobile phone. You may access all features via mobile phone: for example turn off anf turn
on the heater, check state and location of the vehicle, adjust system settings. You may control it
with intellectual voice menu or smartphone application, and via SMS (see table 4).
2.
Via one of the vehicle’s buttons.
Turn on/off by long (at least 2 seconds) push on a designated
button ( see www.tecel.ru/en/).
3.
Via remote control.
Turn on the heater by pressing 3 times. Turn off by pressing 3 times.
pause between button presses should be ~3 s.
4.
Via extenal inputs and additional devices.
See figure 5 for control algorithms.
Status control
*
12V
0V
Оn
Off
Input №18
FanControl
*
To restart the system via input № 18‑ the «satus signal» on the input has to disappear and then appear again.
Trigger control
12V
0V
Input №15
FanControl
On
Off
Figure 5. Control algorithms via inputs
SMS control
Send an SMS containing command in following format:
Access code*Command code#Parameter
”Access code“ — System access code.
”Command code“ — Same command code as in voice menu.
”Parameter“ — Is used in specific cases for certain commands.