Tec-Innovation INNOMAKE CLIP, Руководство пользователя

Страница: 13 / 24

TDIMC1_4_User Manual_IMC-1.1.0_EN 13
4.6. Activation/Deactivation of the intelligent mode (energy saving mode)
The InnoMake Clip is equipped with an intelligent mode which can be activated/deactivated
by pressing the pushbutton on the back of the housing.
When the intelligent mode is activated, the device detects when one is in front of a
permanent obstacle and stops the output of the current feedback.
Activation of the energy-saving mode is signalled to the user by decreasing vibration
strength.
The energy-saving mode is terminated by lightly tapping the housing. The termination of the
energy-saving mode is signalled to the user by increasing vibration strength.
To activate or deactivate the intelligent mode, press the pushbutton 4 times in quick
succession. The change of settings is confirmed as follows:
 2 long, low tones followed by 1 short, high tone means the intelligent mode is activated
 2 long tones followed by 1 short tone in the same pitch means the intelligent mode is
deactivated.
4.7. Activate LED
The LED is located on the front of the device, between the two ultrasonic sensors and
is used for better visibility.
To activate or deactivate the LED, press the pushbutton 3 times in quick succession.
The change of settings is confirmed as follows:

1 long low tone followed by 1 short high tone means the LED is activated

1 long tone followed by 1 short tone in the same pitch means the LED is deactivated.
4.8. After usage
When you have finished using the InnoMake Clip, you should switch off the device.
The following questions will help to prepare the InnoMake Clip for the next usage:
•
Is the device switched off?
see: Power off in section 4.1
•
Is the device dirty?
see: Cleaning in section 6.2
•
Is the device moist?
see: Measures for environmental influences in section 5.2
•
Is the battery of the device fully charged?
see: Charging the battery in section 4.2