Tec-Innovation INNOMAKE CLIP, Руководство пользователя

Страница: 6 / 24

TDIMC1_4_User Manual_IMC-1.1.0_EN 6
Charging the InnoMake Clip is described in
section 4.2 .
On the back of the InnoMake Clip there is a pushbutton in the upper left corner which can
be used to switch the device on and off and to control other functions.
The pushbutton as a control element is described in more details in
section 2.2 .
Under the push button is the clip, which serves to attach the device to an article of clothing
(e.g., belt, jacket lapel, breast pocket) or also e.g., on the strap of a backpack. The clip is
serrated for a better hold. Carefully open the clip and attach it to the selected item/area.
Please be careful with sensitive items of clothing!
A LED is installed to the left of the pushbutton, which provides coloured feedback about the
charging status during the battery is charged. Of course, the InnoMake Clip also provides
acoustic information about its charging status. See section 4.3 for more information.
Information on the application follows in section 4 .
Charger with micro USB-plug
The packaging of the InnoMake Clip contains a charger with a micro USB plug, which is
intended for charging the device. It should not be kept near children.
Charging the battery is described in
section 4.2 .
2.2. Operating elements and interfaces
The InnoMake Clip has a micro USB interface. The micro USB socket is located on a side
surface of the device as described in section 2.1. The USB interface is intended for charging
the InnoMake Clip with the charger with micro-USB plug supplied by us.
Do not connect any other devices to the InnoMake Clip!
Charging the battery is described in section 4.2.
A pushbutton is attached to the back of the device as a control element. This pushbutton
can be used to:
Pushbutton
on the backside of
the InnoMake Clip