3
PIN code entering
PIN code is entered with vehicle ignition and engine on by steadily
pressing the original vehicle’s buttons. When entering one of the PIN
digits, please make sure that pressing or pause duration is no longer
than 1 second.
Please keep the pause of approximately 2 seconds in between
the digits. If you made a mistake while entering the PIN code, please
wait for longer than 3 seconds and re-enter the PIN code.
PIN code entering sequence:
◊
Turn the ignition and engine on Enter the PIN code
◊ Wait for audible confirmation trill
Available PIN code options
,
,
,
,
- buttons are used as an example. Please refer to the Integrator software files for the list of buttons
perceived by the unit.
Single-button PIN code entering
One-digit PIN code:
Two-digit PIN code:
~2 second pause
Multiple buttons PIN code entering
When entering the PIN code you need to keep in mind the button pressing sequence
One-digit PIN code:
Two-digit PIN code:
~2 second pause
Immobilizer feature
Immobilizer feature is designed for preventing the vehicle from being
stolen from its parking area. Immobilizer enters the Guard mode when
the ignition is turned off for longer than 30 seconds. If the Immobi-
lizer feature is in Guard mode then it is necessary to enter the correct
PIN code otherwise the engine will be locked:
◊
The engine will be turned off right after the vehicle starts mov-
ing if the Speed control is on and is supported by the vehicle.
◊
The engine will be turned off within 5 seconds after the ignition
has been turned on if the Speed control is off or is not supported
by the vehicle.
Immobilizer can leave the Guard mode and the engine lock can be un-
locked by entering the PIN code without turning the ignition off prior
to the procedure.
You do not need to enter the PIN code again if the ignition has been
off for less than 30 seconds.
Anti HiJack feature
Anti HiJack is the function that prevents the vehicle from being hijacked
or stolen from its parking area.
Anti HiJack enters the Guard mode in the following cases:
◊
The ignition has been turned off for longer than 30 seconds
(in case if Immobilizer feature was not on; if it was on then
the Immobilizer will follow its algorithms).
◊
Driver’s door has been opened.
Upon entering the Guard mode, Anti HiJack feature passes a sequence
of phases and in case if the Guard mode has not been deactivated, the fea-
ture will activate the Engine locking.
Changing of phases takes place only when the ignition is on. When igni-
tion has been turned off the Immobilizer will save its current condition
and will continue its operation when the ignition is back on.
Anti HiJack’s Guard mode can be deactivated at any phase by entering
the PIN code.
Guard mode includes the following phases:
◊
Idle phase
◊
Alarm phase
◊
Locking phase
Idle phase.
In this phase Anti HiJack follows two different algorithms
depending on the availability of Speed control.
If the Speed control is available, Anti HiJack waits until the vehicle covers
a set distance from the moment of Guard mode activation. Upon that, Anti
HiJack goes into the Alarm phase.
If the Speed control is not available, Idle phase consists of three stages:
◊
Waiting for driver’s door closing
◊
Waiting for a certain number of brake pedal pressings
◊
Pause before Alarm phase initiation
Alarm phase.
This phase consists of two stages:
◊
Driver warning on the necessity of entering the PIN code (10
seconds). It is carried out by an audible sound alert.
◊
Warning the other drivers on the road on the possible hazardous
situation due to the upcoming engine locking (10 seconds). It is
carried out by vehicle hazard lights warning the other drivers.
If at any of the stages mentioned above attempts of entering the PIN
code shall occur, the stage’s duration may be increased up to 20 seconds,
but the overall phase duration cannot be longer than 30 seconds.
Locking phase.
Engine locking is activated. Hazard lights will be on
for 15 seconds. Anti HiJack will be in the locking phase until the PIN
code is entered.
When safe locking mode is on (see Immobilizer hardware
settings programming (Menu 1) section), Engine locking will
be activated only if the vehicle’s speed is 30 km/h or less.
If the vehicle speed exceeds 30 km/h the Immobilizer will wait
for speed decrease for an unlimited amount of time (while
the vehicle is moving). As soon as the speed goes as low as
30 km/h the immobilizer will lock the engine
Use of safe locking mode allows mitigating the risk of collisions when
Engine locking is activated.
When the ignition is off Anti HiJack turns the hazard lights and au-
dible driver warning signals off. If the Immobilizer feature has not en-
tered the Guard mode (see the Immobilizer feature section) then, upon
the next ignition activation Anti HiJack will activate audible driver warning
and hazard lights for 15 seconds. In the meantime Anti HiJack feature
allows starting the engine but will prevent driving following the same
algorithms as Immobilizer feature.
If the Immobilizer feature has entered the Guard mode, then, upon
ignition’s deactivation Anti HiJack feature will stop its operation and Im-
mobilizer will follow the algorithms of Immobilizer feature.
