TEAMWELDER TIG 180 AC/DC puls Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 55

background image

Intended use

Applications

299-020200-TWD01

14.07.2017

13

3

Intended use

WARNING

Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!

• The equipment must only be used in line with its designated purpose and by trained or

expert personnel!

• Do not improperly modify or convert the equipment!

3.1

Applications

Arc welding machine for TIG DC and AC welding with lift arc (touch starting) or HF ignition (contactless)
and MMA welding as secondary process. It may be possible to expand the functionality by using
accessories (see the documentation in the relevant chapter).

3.2

Documents which also apply

3.2.1

Warranty

For more information on the warranty topic refer to the included CD-ROM or the website:

www.teamwelder.com

.

3.2.2

Declaration of Conformity

The labelled machine complies with EC directives in terms of its design and
construction:

• EC Low Voltage Directive (2006/95/EC)
• EC EMC Directive (2004/108/EC)

In case of unauthorised changes, improper repairs, non-compliance with specified deadlines for "Arc
Welding Equipment

– Inspection and Testing during Operation", and/or prohibited modifications which

have not been explicitly authorised by TEAMWELDER, this declaration shall be voided. An original
document of the specific declaration of conformity is included with every product.

3.2.3

Welding in environments with increased electrical hazards

In compliance with IEC / DIN EN 60974, VDE 0544 the machines can be used in
environments with an increased electrical hazard.

3.2.4

Service documents (spare parts and circuit diagrams)

WARNING

Do not carry out any unauthorised repairs or modifications!
To avoid injury and equipment damage, the unit must only be repaired or modified by
specialist, skilled persons!
The warranty becomes null and void in the event of unauthorised interference.

• Appoint only skilled persons for repair work (trained service personnel)!

Original copies of the circuit diagrams are enclosed with the unit.
To obtain spare parts, please refer to the included CD-ROM or contact your local authorised dealer.

3.2.5

Calibration/Validation

We hereby confirm that this machine has been tested using calibrated measuring equipment, as
stipulated in IEC/EN 60974, ISO/EN 17662, EN 50504, and complies with the admissible tolerances.
Recommended calibration interval: 12 months

«
...
11
12
13
14
15
...
»

Содержание TIG 180 AC/DC puls
























































Отзывы:

Нет отзывов

Похожие инструкции для TIG 180 AC/DC puls

Бренд: Cal-Royal Страницы: 4

Бренд: CABASSE Страницы: 16

Бренд: Nelson Страницы: 18

Бренд: Nelson Страницы: 150

Water Jet Lightning

Бренд: Oase Страницы: 28

Бренд: Oase Страницы: 9

Бренд: Paradox Страницы: 2

Digiplex EVO DGP2-640

Бренд: Paradox Страницы: 24

Бренд: KAPTARLIFT Страницы: 16

Бренд: TANDBERG Страницы: 12

Бренд: ADEMCO Страницы: 40

FastMig M 320, FastMig M 420, FastMigM 520

Бренд: Kemppi Страницы: 16

Magnavox FW 55C

Бренд: Magnavox Страницы: 80

PORTAGANTRY 11000

Бренд: REID LIFTING Страницы: 21

Бренд: Launch Страницы: 62

Sportsound SSR-300

Бренд: Daktronics Страницы: 6

Norton J1600 UniTrol

Бренд: Assa Abloy Страницы: 4

Бренд: Sinotec Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды