TEAMWELDER Plasma CUT 105, Руководство пользователя

Страница: 38 / 64

User manual 38
Mode selection
Use it to cut metal into sheets / plates.
For optimal consumables duration.
Use it to cut the expanded metal.
Automatically re-start the pilot arc.
It is used to remove welding or gouging.
Switch ON (I) as shown.
Note: The cooling fan will only
work when the plasma needed.
Check that the gas pressure is above 3 bar in cutting and
grid mode and above 2 bar in gouging mode.
Check the lighting indicators
Check the indicator light ARE NOT illuminated. Safety indicator torch retaining cap.
Turn ON