P a g e 16 | 64
TM1-5GM2020SG
2.3 Panel LEDs
2.4 Antenna Frequency Bands Information
Above table shows the operating band in the TeaM1-5GM. Any 50 Ohm RF antenna working in the
bands shall be applicable for the device. The TeaM1-5GM uses SMA socket on its panel, and the
respective antennas shall be terminated with SMA plug accordingly. The maximum transmission
RF power from the device is illustrated as in table below.
The antennas selected shall be complaint with above power rating requirements. For CA bands,
see document Quectel_RG50xQ_Series_CA&EN-DC_Features. Optional antennas refer to
Appendix.
4G Signal Strength and Connectivity
5G Signal Strength and Connectivity
LEDs
ON
ON
ON
ON
LEDs
ON
ON
ON
ON
Status Connected Weak Medium Strong
Status Connected Weak Medium Strong
GNSS LED:
ON --- GNSS connected
Flashing --- Searching
Power LED: On -- Operating
Flashing -- error
LAN LED:
On — LAN connected
SRL LED:
On -- Operating
WAN LED:
On — WAN connected
USB LED:
On — USB portal connected
SA LED:
On — 5GNR SA connected
NSA LED:
On — 5GNR NSA connected
Содержание TeaM1-5GM
Страница 33: ...P a g e 33 64 TM1 5GM2020SG 6 4 3 Time Synchronization Time Synchronization setup for the system...
Страница 49: ...P a g e 49 64 TM1 5GM2020SG 7 6 SNMPD The section allow user to setup the SNMPD for manual configuration...
Страница 59: ...P a g e 59 64 TM1 5GM2020SG 9 3 Memory 10 Logout Click this section the router will be logged out...
