Teamline 5141 Installation Guide
Page 5
About the Teamline 5141 system
1. In the Microsoft Teams admin center, enable Islands coexistence mode for
the room account.
2. In the Rooms page in Maestro, select the appropriate room. Ensure you are
running Teamline firmware version 1.4.1 or later and that the Teamline
system is signed in to Skype for Business.
3. Click
Settings
then select
Teams
. Enter the email address and password for
the room account. Click
Update
to save your changes.
4. In the General tab, select
Teams
from the
Outgoing calls
options.
5. Click
Update
to save changes.
Current limitations
n
The Teamline system must be signed in to Skype for Business
n
In Maestro, outgoing calls must be set to Teams to call other Teams
contacts
n
The directory on the Touch uses the Skype for Business call directory, not the
Teams directory
n
The Teams account sign in status is not displayed on the Touch
n
In this release, the following features are not supported on the Touch:
l
Adding participants to a call
l
Sharing content into a call
l
Removing participants from a meeting
l
Muting and unmuting participants
Note:
You can perform these tasks using the Teams app on a laptop
connected to the meeting.
On premise requirements
For on-premise deployments, if the Skype for Business server certificates were
issued by a private certificate authority, ensure you have the certificate of the
Root Certificate Authority and any intermediate certificates. For more
information, see
How to export Root Certification Authority Certificates
on the
Microsoft website.
About the Teamline 5141 system
The Teamline 5141 system is an inline replacement for the Teamline 5140
system. For more information about the 5140 end of life schedule, see
the
Teamline 5140 Meeting Room Codec End of Life Schedule
PDF.
The following figure shows the connectors on the rear of the Teamline system:
Содержание 5141
Страница 1: ...Teamline 5141 Installation Guide...
