Teamline 5141, Руководство по установке, Страница: 10 / 30

Teamline 5141 Installation Guide Page 9
Connecting Teamline 5141 to peripherals
Note: If you are using the Logitech Meetup camera, ensure you are running the
latest version of the camera firmware. Otherwise, camera PTZ controls may
not work properly on the touchscreen. For more information and to download
firmware, go to the downloads area on the Logitech support site here:
https://support.logitech.com/en_gb/product/meetup-
conferencecam/downloads
.
Connecting displays and audio
The audio emits from the left HDMI connector on the rear of the Teamline
system only. If you are using one display, connect the supplied HDMI cable
from the display to the connector on the left (closest to the power
connector) on the Teamline system. For a two display system, connect the
second display to the HDMI connector on the right. This second display will
not emit audio.
Extending cables
For information about supported cable extenders and cable information, see
Cable recommendations for room systems .
Connecting Pronto
If it has been included with your system, Pronto can be connected to devices
(such as laptops) to share content and audio, and display current meetings on
the Touch and room display, even if the room is not invited to the meeting.
When connected to the device, Pronto detects active meetings in the user's
Outlook calendar, then enables the
Join now tile on the Touch to allow users in
the room to join the meeting.
Connect Pronto to the USB connector on the Teamline system using the USB-
A cable, and ensure the other end of the cable is accessible to users to plug
into their laptops. The first time users plug Pronto in, instructions are shown
on the room display: