18
⑫
Foil Position
With a change in the plastic card intake range, precise placement of the film is carried out.
With an enlarging of the intake range, the lamination of the plastic card starts later.
Conversely, with a reduction in the intake range lamination starts earlier. The direction
arrows on the display indicate the direction of travel once lamination starts.
Setting range:
-30...0...+30 x 1/10mm
⑬
Standby
If the laminator is not used for 30 minutes it switches to energy-saving mode. The
temperature of the heated roller drops in this mode. Press [SET] or sent a Print job to
finish. Also a card in entrance position stops standby state. The energy-saving mode must
be active for this option!
Setting range:
OFF
Standby off
ON
Standby on
