Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
11
TKG VT 1018 - 151120
Assembly page 11/49
Fax +32 2 359 95 50
9.
Hang the front guard (1) to the rear guard (4) with the position fixer provided at the front
guard rim, and then clamp together with the clips provided.
10.
To ensure that it is impossible to have access to the fan blade without using a tool, a screw
is provided with this appliance in order to attach both parts of the mesh guard together.
This screw must be tightened with the appropriate hex nut on the lower part of the guards.
We will not be responsible for any injuries in case this screw had not been tightened before
using the appliance.
11.
To change the height, loosen the pipe connector (12) and slide the upper pipe to a
suitable height. Then tighten the pipe connector (12) again.
OPERATION
This appliance is equipped with 3 ventilation speeds. To switch on the appliance, press
one of the speed knobs. To switch it off, press “0”.
Speed settings:
0 = OFF
1 = Low
2 = Medium
3 = High
This appliance also has an oscillation function:
Push the oscillation knob (7) to switch on the oscillation.
Pull the oscillation knob (7) to stop.
It is also possible to tilt the upper part of the appliance in order to adjust the airflow
direction vertically.
CLEANING AND CARE
Always disconnect the power supply cable from the power supply before carrying out any
cleaning operation.
To remove dirt from the plastic surfaces, use a soft damp cloth. Use a vacuum cleaner to
remove the dust from the guards without having to disassemble them.
Never immerse the fan in water or any other liquid.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
on the
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
ErP Declaration – Regulation 1275/2008/EC
We, Team Kalorik Group SA/NV, hereby confirm that our product meets the requirements of
regulation 1275/2008/EC. Admittedly, our product does not dispose of a function to minimize
the power consumption, which should according to regulation 1275/2008/EC put the product
in off or standby mode after finishing the main function, but this is practically impossible, as it
