Team Blacksheep TBS TANGO 2 Radio, Руководство пользователя

Страница: 51 / 51

FAQ
●
My TANGO does not bind to the receiver - both are blinking slowly green
○
Update your build-in CROSSFIRE to 3.73 (beta) or later and retry
●
After binding, the receiver shows a double pattern and I get no signals in BF/ iNav/
…
○
This is an authentication error on the CROSSFIRE. To solve it:
■
Shut down your drone and the TANGO
■
Power up the TANGO
■
Set it in Bind-mode
■
Power up the receiver
■
Push the bind button on the receiver
○
After a few seconds, the green led on the receiver should switch to a constant green light
● I get movements BF/ iNav/ … on the 4 sticks but not from any switch
○ You need to assign the switches in the “Mixer” page of your model to a channel you’d like it
to be. For detailed information on the mixer page, have a look at Painless360’s OpenTX
video series
● The switches on channel 9 and following do not show any movement in BF
○ Open the
Agent Lite/ CROSSFIRE receiver/ General/ Mode: 12Ch
● I can no longer see the Frequency setting and the output power is limited
○ Your CROSSFIRE is in a region-lock mode. This mode makes sure that non-allowed settings
are not available. If you have set it the by accident, here is how you can unlock it
●
In Agent X/ M/ Lite the CROSSFIRE and WiFi modules do not show up
○
Navigate in the Model settings, page 1 and disable the external module
Manual written and designed by ivc.no in cooperation with TBS and Kamikatze-fpv.de.
51