Attention
These Long Range Systems are capable of radio frequency transmissions and output power that may be
not allowed in your country.
Please always check your local RF legislation to set the frequency and output power according to
the regulation.
A general rule for RC aircrafts is that they must be controlled always under sight of view, check your RC
regulation to keep up to date with regulations.
Getting ready
Getting set up and ready to fly is a quick and simple task. In most cases plug&play when using TBS
equipment.
FAQ
If you got any questions left after reading this manual you should visit the
section
Note
This manual is written based on
FreedomTX 1.31, CROSSFIRE 6.10, and WiFi 2.04
. If some functions are not
available for you, please update your system to these or later versions.
How-To Videos
A short playlist on how to backup and update the sd card, CROSSFIRE, and the TANGO 2 FW, as well as how
setup the switch warnings
Updating
To update and configure your TANGO 2 and the in-build CROSSFIRE, you need the TBS Agent X, which you
can download from the
.
To update your CROSSFIRE, connect it to the USB port of the transmitter and run the update by Agent X.
For detailed instructions on how to use Agent X, have a look at the
.
6
