Set failsafe
Configuring the CROSSFIRE failsafe state settings is done via Agent lite. Your model needs to be bound and
running for the failsafe setting to work. This setting is only needed on models without FC. On all other
models, navigate in the receiver settings to failsafe type and set it to CUT.
1. Press and hold the Menu button and select
TBS Agent Lite
, then select
TANGO II XF/ Set
Failsafe
2. Arrange the switches and sticks into the
desired failsafe state
3. Select the Set failsafe-menu item and wait for
the failsafe to be stored on the receiver
Set up switch warning
1. Press the Menu button and navigate with the
PAGE button to the SETUP page
2. Scroll down to the switch warning setup
(S-Warning)
3. Bring all your switches in the position you
want them to be monitored
4. Hold the Enter button. Now the positions are
saved
5. To disable it on certain switches, short press
enter
6. With the scroll wheel, you can navigate to the
switch
7. Hit the enter button to disable this switch
warning or enable it again
A previously disabled switch will not be activated again
by these steps. You need to enable it by yourself.
29
