Team Blacksheep CROSSFIRE, Руководство пользователя

Страница: 27 / 76

You can choose between several frequencies:
Frequency
Setting Frequency Max. power level Settings
locked
868 868 MHz No limitations no
915 915 MHz No limitations no
868CE 868 MHz, LBT technique No limitations no
915FCC 915 MHz No limitations no
868 Race 868 MHz No limitations no
915 Race 915 MHz No limitations no
868CE/ 915FCC:
​ same as CE/ FCC mode but with no limitations in the power level etc
868 Race/ 915 Race: ​ uses double the bandwidth to avoid failsafes during bigger race events with many
pilots. ​ Only use them in these scenarios!
To change the frequency band:
1. Power up your transmitter
2. Open the ​ Crossfire Transmitter ​ menu
3. Navigate to the ​ General ​ menu
4. Change the ​ Frequency ​ setting according to your location
The frequency change is instant, and affects transmitter and receiver. It can even be changed in-flight if
necessary. If you change the frequency or region setting without the receiver being powered up you need
to rebind the receiver.
Region settings:
In the region settings, you can set your Crossfire according to your local laws. The region and the
frequency setting will disappear after this, as well as not allowed setting for this region. The Crossfire then
will limits the output power and the used the band according to the law and enables LBT (CE mode only)
Region setting Frequency Max. power level Settings
locked
Open Not limited Not limited no
CE 868 MHz, LBT technique 25mW yes
FCC 915 MHz 1W yes
C-Tick 915 MHz 1W yes
27