Teagle Telehawk, Руководство оператора и список запчастей

Страница: 13 / 28

4. Pull the motor out of the crossbeater central shaft.
Please note the position of the motor keyway shaft
when placing it back into the crossbeater shaft.
5. To aid the removal of the motor, screw in four M16 x
100mm setscrews into the crossbeater mounting
plate SC6114. Once the setscrews are touching the
crossbeater, tighten all four setscrews evenly one
turn in the clockwise motion (to keep central
pressure on the shaft) until the motor is free.
6. To replace the motor, follow the procedure above in
reverse. See figure 7.
BED CHAIN MOTOR
The bed chain motor supports the front sprocket bed
assembly. The removal procedure is very similar to the
crossbeater above. Follow the same procedure but the
motor mounting plate is kept in place using M12 cup
square bolts & nuts. See figure 8 below and page 18
for more information.
TOP HOUSING SWIVEL MOTOR
See page 14 for removal and replacement of the
motor.
DISPOSAL
At the end of the machine’s working life, the method of
disposal must be within the legislation laid down by the
local authority or the National Environment Agency.
The machine is composed of ferrous materials, synthetic
paints and rubber compounds.
9
Figure 8. Bed chain assembly with motor
Figure 7. Crossbeater with motor