USER GUIDE
SM-401 Shelf Mount Bracket
(1)
Use the brackets to secure a TeachLogic
®
amplifier/receiver to a wall or a flat surface above or below the amplifier. The
pair of brackets may be used in a manner that allows for quick installation, or one that conceals the bracket behind the
amplifier with minimal visibility.
Note
: The two brackets are mirror images of one another. Each bracket has a longer side and a shorter side. These are
referred to as the “long flange” and the “short flange”.
The “central cutout” in both flanges is provided so that the ventilation slots in the amplifier case are not blocked.
Short
Flange
Long Flange
Central Cutout
SUPPLIED ARE FOUR SILVER SELF-TAPPING SCREWS THAT WILL REPLACE THE FOUR SILVER SCREWS THAT
HOLD THE METAL AMPLIFIER CASE ONTO THE PLASTIC AMPLIFIER CHASSIS. THE SUPPLIED SCREWS ARE
LONGER THAN THE ONES BEING REPLACED.
DO NOT USE ANY OTHER SCREWS
AS THEY MAY DAMAGE THE ELECTRONICS INSIDE AND/OR THEY MAY
NOT ADEQUATELY ENGAGE THE PLASTIC CHASSIS AND SECURE IT IN PLACE.
ALWAYS UNPLUG THE AMPLIFIER FROM ITS POWER SUPPLY PRIOR TO INSTALLATION.
CAUTION
A: 1 x LH bracket
B: 1 x RH bracket
C: 4 x Silver 11mm self-
tapping Screws
CONTENTS
Short
Flange
