Remove screws
Remove screws
QUICK MOUNT METHOD.
This is ideal for most applications. The amplifier can be mounted above or below the
mounting surface such as a desk, shelf, or wall. The long flange can be faced away from, or toward the amplifier, and
can be its top or bottom.
3.
Use the 4 supplied silver 11mm self-
tapping screws (C) to secure the short
flange to the side of the amplifier. Then
mount to the desired surface with a
fastener (not supplied) at each end of
each bracket.
(2)
THERE ARE MULTIPLE METHODS TO MOUNT THE SM-401 BRACKETS. TAKE CARE TO DETERMINE THE
ORIENTATION THAT BEST SUITS YOUR NEED PRIOR TO STARTING.
ALWAYS UNPLUG THE AMPLIFIER FROM ITS POWER SUPPLY PRIOR TO INSTALLATION.
1.
Determine mount orientation. There
are 4 variations to accomodate needs:
1. bottom/out (shown below left), 2.
bottom/in, 3. top/out, 4. top/in (shown
below right).
2.
Remove the existing side screws that
secure the amp cover to the chassis.
1.
Determine top vs. bottom mount
orientation (top mount shown).
2.
Remove the existing side screws that
secure the amp cover to the chassis.
3.
Use the 4 supplied silver 11mm self-
tapping screws (C) to secure the short
flange to the side of the amplifier.
INSTALLATION
SM-401 Shelf Mount Bracket
C
FLUSH MOUNT METHOD.
The long flange faces in and only the ‘ears’ of the long flange protrude out from back
of the amp. This requires the installer to pre-mark the mounting location, mount the brackets, then attach the amp to
the brackets after they’re securely fastened to the mounting surface.
C
4.
Hold the amp in the desired mounting
location. Using a pencil, mark 3-4 sides
of the brackets on the mounting surface
to ensure a precise fit in the next steps.
5.
Remove brackets from amp. Align
the brackets with your marks from step
4. Attach brackets to mounting location
with 2 fasteners per bracket.
6.
With brackets securely mounted,
reattach amp to brackets with silver
11mm self-tapping screws (C).
C
rev20200330
