21
bluetooth
This display means the Bluetooth device is not
powered.
1. Press and hold "BT" source button for 3
seconds to power the Bluetooth on.
This display means the touch panel is ready
to pair with your Bluetooth device.
2. Search Bluetooth setting on your mobile
device for "TeachLogic".
Each Touch Panel has a unique Serial Number
on the panel display.
Look for SN:TeachLogic-00000XXX and pair that
number with your device.
This display indicates that your mobile device and
Touch Panel are in the pairing process.
This display indicated your device and the Touch
Panel are paired.
**Please note that your device will also control the
volume.**
Bluetooth will automatically power off if no signal
is received after about 10 min.
To connect a different Bluetooth device, hold "BT"
source button for 3 seconds and all "BT" action
will be stopped.
After completing this step, another moble
Bluetooth device can be connected
to the TeachLogic CPS-120 or CPR-125 touch
panel.
Pairing a Bluetooth moble device to CPS-120 or CPR-125 Touch Panel
BT
BT
