Connection of Antenna
Install AM Loop Antenna
As shown in the figure, install AM loop antenna.
Connection Method of Antenna Cable
1
Press down the lock handle.
2
Insert the wire into the hole.
3
Release the fixing rod to restore its original shape.
Connect FM Indoor Antenna
The FM indoor antenna is suitable for most indoor applications.
Extend the antenna and move it in various directions until a clear
signal is received. Mount the antenna with a pin or similar item in a
location where the distortion is the least.
$17(11$
$0
)0
*1'
If you still cannot receive a clear sound with the FM indoor antenna
o
connected, we recommend that you try an FM outdoor antenna.
Connect AM Loop Antenna
The AM loop antenna is suitable for most indoor applications. Adjust
the position and direction of the antenna until clear sound can be
received. Try to keep the antenna far away from the main unit, TV,
speaker cable and power cable as much as possible.
$17(11$
$0
)0
*1'
If you cannot receive a clear sound with the AM loop antenna
o
connected, we recommend you to use an AM outdoor antenna.
Connect FM Outdoor Antenna
$17(11$
$0
)0
*1'
Keep the antenna far away from the source of noise (signal of
o
fluorescent lamp, busy streets, etc.)
It would be dangerous to install the antenna close to the power
o
cable; therefore, be sure to keep the antenna away from the power
cable.
Connect AM Outdoor Antenna
AM
FM/75
GND
If the antenna can be extended above the window or any higher
o
outdoor location, then the tuner may give a better performance.
Do not disconnect the loop antenna.
o
6
