Teac TD-01 Portable, Руководство пользователя

Страница: 35 / 68

35
5-4. TEDS calibration
A TEDS sensor has calibration information, including rated out-
put and rated capacity, stored in its memory.
TEDS calibration reads this calibration information to automati-
cally record calibration values.
o
Press and hold the TEDS button to open the TEDS calibra-
tion screen without needing to select the Function Menu.
Rated Output/Rated Capacity
display
c
Zero Balancing
c
Select EU
c
Cal. Value Lock setting
5-4-1. Sensor value memory selection
This unit can save six types of calibration values for each con-
nected sensor.
Select the memory number for saving the calibration value.
5-4-2. Rated Output/Rated Capacity display
After reading the TEDS data, the Rated Output/Rated Capacity
is shown.
Rated capacity digit shown during TEDS calibration
TEDS sensor
Rated Capacity
Unit
Indicator
value
1 N, kN 01.000
2 N, kN 02.000
3 N, kN 03.000
4 N, kN 04.000
5 N, kN 005.00
10 N, kN 010.00
20 N, kN 020.00
30 N, kN 030.00
40 N, kN 040.00
50 N, kN 050.00
100 N, kN 0100.0
200 N, kN 0200.0
300 N, kN 0300.0
400 N, kN 0400.0
500 N, kN 0500.0
NOTE
o
TEDS data is automatically read when the power is turned
on.
o
The rated capacity decimal point position set here will be
used as the indicator value decimal point position.
o
The Max. Disp. Value is set as 110% of the Rated Capacity.
ATTENTION
The bridge voltage setting will be set to a value that is less
than the Maximum Excitation Voltage stored in the TEDS
memory.
5-4-3. Zero Balancing
With no load on the sensor, press the ENT button.
During zero balancing, a pop-up appears to show that it is in
progress. When zero balancing completes, the setting screen
for the next procedure appears.
o
If a calibration error appears, conduct countermeasures
according to the error message.
5. Calibration