Teac Tascam TU-690, Руководство пользователя

Страница: 12 / 32

Remote Control Unit
12
ENGLISH
Using the Remote Control Unit
By using the provided remote control unit, the tuner and some
other TASCAM components used with it can be controlled from
your listening position.
To use the remote control unit, point it at REMOTE SENSOR on
the tuner (or of other TASCAM component).
Notes:
<
Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there are
any obstacles between the unit and the remote control.
< If the remote control unit is operated near other appliances
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly.
Conversely, the other appliances may operate incorrectly.
< Battery Installation
1 Remove the battery compartment cover.
2 Insert two "AA" dry batteries.
Make sure that the batteries are inserted with their positive
"
+
" and negative "
_
" poles positioned correctly.
3 Close the cover until it clicks.
< If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted.
In this case replace the batteries with new ones.
<
Precautions concerning batteries
<
Be sure to insert the batteries with correct positive "
+
" and
negative " _ " polarities.
<
Use batteries of the same type.
Never use different types of batteries together.
<
Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
<
When the remote control unit is not to be used for a long time
(more than a month), remove the batteries from the remote
control unit to prevent them from leaking.
If they leak, wipe away the liquid inside the battery
compartment and replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.