_ 11 _
ENGLISH
If only a frequency is preset, fill in the station name
using manual or automatic memory presetting.
(Example) FM 98.80 MHz 3ch, Station name: BBC 1
1. Press the BAND button.
Select the FM band.
2. TUNING
Set 98.80 MHz by pressing the TUNING button.
3. FILE
Press the FILE button.
"---" or the station name preset last will be shown on
the display. Preset the station name, "BBC 1".
(1) B
∑
B ---: after setting 'B' by pressing the
TUNING button when the first signal blinks, press
the NEXT button.
(2) Preset "B, B, C, 1" as in step (1) above.
4. MEMORY
Press the MEMORY button briefly (0.5 second or
less).
(The "MEMORY" indicator blinks.)
5. PRESET CALL
After setting "03" by pressing the PRESET CALL
button, press the MEMORY button briefly once more.
●
BBC1 FM 98.80 MHz 03 has been just preset.
Notes:
●
File content: A, B, C...X, Y, Z (alphabet)
0, 1, ... 8, 9 (number), blank
●
Current time will not be displayed if the station name
has already been preset.
Sleep programming is used to preset the time to turn
off system power while listening to music.
1. Press the SLEEP button.
"SLEEP 90" is shown on the front display.
2. Each press of the button changes the time indication
by 10 minutes.
∑
SLEEP 90
∑
SLEEP 80
∑
...
∑
SLEEP 10
∑
SLEEP ...
(Released condition)
If you press the TUNING button after pressing the
SLEEP button, you can adjust the time by one minute at
a time.
3. Five seconds after presetting the sleep time, the
system will return to the previous status and
thereafter begin sleep timing.
Notes:
●
If you want to know the time remaining until the
sleep time, press the SLEEP button once.
●
To allow the sleep function to work properly, you
need to connect the remote control terminal of the
tuner to the corresponding remote control terminal of
the amplifier (A-R600).
HOW TO MEMORIZE BROADCASTING
STATION NAME
HOW TO USE SLEEP FUNCTION
