CD player
Playback is not possible.
e
If the disc is upside down, reload it with the labeled
side up.
e
If the disc is dirty, wipe it clean.
e
Discs that do not have any recordings on them or
that have not been finalized cannot be played back.
Make sure that CD-R/CD-RW discs that you want to
play back have recordings on them and have been
finalized.
e
Depending on disc quality and recording conditions,
playback of some CD-R/CD-RW discs might not be
possible.
e
Programmed playback works with finalized discs only.
The sound skips.
e
Vibrations will cause skipping. Place this unit in a sta-
ble location.
e
If the disc is dirty, wipe it clean.
e
Do not play any disc that is warped, deformed or
damaged.
MP3/WMA files
Playback is not possible.
e
Check the file format. MP3 files are recognized by
the “.mp3” file extension and WMA files by the “.wma”
extension.
e
The MP3/WMA file might be damaged.
e
Confirm that the file format is one that this unit can
play back (page 7).
Bluetooth function
Pairing fails.
e
Refer to the Bluetooth device’s operation manual.
e
Put this unit into standby and turn the other Bluetooth
device off and on once. Then, try pairing again.
e
Turn off all Bluetooth devices other than the one you
are trying to pair the unit with.
e
After deleting the “SL-D800BT” data from the other
Bluetooth device, try pairing again.
Cannot connect.
e
Confirm that the other Bluetooth device is on and its
Bluetooth function is enabled.
e
Are the unit and the other Bluetooth device too far
apart?
Is there a wall or other obstruction between them?
As much as possible, use them close together in an
environment without obstructions.
e
Put the unit into standby and then on again.
e
Unpair the “SL-D800BT” from the Bluetooth device
and follow the instructions in “Pairing with another
Bluetooth device” on page 26.
The touch pairing reader does not work.
e
Press the Bluetooth function button on the unit. When
using the remote control, press the FUNCTION button
repeatedly until the Bluetooth indicator lights.
e
Check the settings of the other device that you are
using.
The sound skips or there is noise.
e
Is there a wireless LAN, other Bluetooth device, micro-
wave oven or similar electronic equipment nearby?
Keep such devices as far away as possible.
e
Reduce the distance between the other Bluetooth
device and this unit during use.
e
Try moving the other Bluetooth device and this unit.
33
ENGLISH
