33
Troubleshooting
In case of any trouble with this unit, please take the time to look
through this chart and see if you can solve the problem yourself
before you call your dealer or a TEAC service center.
No power.
e
Check the connection to the AC wall outlet.
Playback does not start.
e
Reload the disc with the label side UP.
e
Clean the disc.
PROHIBIT icon
appears on the screen.
e
The operation is not permitted by the disc or the unit.
e
Note that during playback of a title part (cautions, software
maker's logo, etc.), most operations are prohibited by the
disc.
e
If another operation is still in process, wait a moment and try
again.
Picture playback stops and operation buttons do not work.
e
Turn the unit off and back on again and restart the playback.
No picture.
e
Turn on the TV.
e
Check that the system is connected properly.
e
Make sure you have selected the proper video input on the
TV so that you can view the pictures from the DVD player.
Picture noise.
e
If video from this system has to go through your VCR to get
to your TV, the copy-protection applied to some DVD
programs could affect picture quality. Please connect the
unit directly to your TV.
The image is distorted or monochromatic.
e
The color system selected does not match your TV. Press
the PAL/NTSC button of the remote control unit once or
twice, and then select correct color system in the DVD
SETUP menu.
e
Select the aspect ratio to match your TV.
The aspect ratio of the screen cannot be changed.
e
The aspect ratio might be fixed by the disc.
e
Depending on the TV, you may not be able to change the
aspect ratio.
There is no sound or only a very low-level sound is heard.
e
Check that the speakers and components are connected
securely.
e
Check the operation of the connected component.
e
Check the audio output setting. (see page 13)
e
The sound is muted during pause, slow-motion, fast
forward/reverse, and stepping playback. Press the PLAY
button to resume normal playback.
Severe hum or noise is heard.
e
Check that the speakers and components are connected
securely.
e
This unit cannot play such discs as CD-ROMs. Use a
playable disc.
Remote control doesn't work.
e
When the function selected by the main unit and remote
control unit differs, remote control doesn't work. Press the
FUNCTION buttons (DVD, TUNER, DIGITAL, TV/AUX) of the
remote control unit to select correct function. (Even when
the FUNCTION buttons are pressed without pointing at the
main unit, the function of the remote control unit will be
changed.)
e
If the batteries are dead, change the batteries.
e
Use remote control unit within the range (5m /15ft) and point
at the front panel.
e
Clear obstacles between the remote control unit and the
main unit.
e
If a strong light is near the unit, turn it off.
Cannot play.
e
Load a disc with the playback side facing down.
If the disc is dirty, clean the surface of the disc.
e
A blank disc has been loaded. Load a prerecorded disc.
e
Check the region code of the DVD.
Sound skips.
e
Place the unit on a stable place to avoid vibration and shock.
e
If the disc is dirty, clean the surface of the disc.
e
Don't use scratched, damaged or warped discs.
Cannot select the desired surround mode.
e
If you want DTS mode, play a disc recorded DTS format, and
select DTS audio by pressing the LANGUAGE button.
e
If you want Dolby Digital 5.1 CH mode, play a disc recorded
Dolby Digital 5.1 CH format, and select Dolby Digital 5.1 CH
audio by pressing the LANGUAGE button.
e
If you want Dolby Pro Logic II mode, play a 2-channel
(STEREO) source. (When playing a DVD disc, select Dolby
Digital 2 CH audio or PCM audio by pressing the LANGUAGE
button.)
e
Change the Listening mode to off by pressing the LISTENING
button.
If normal operation cannot be recovered, unplug the power cord
from the outlet and plug it in again. This resets the internal
micro-computer which can be disturbed during electrical
storms, power interruptions, et cetera.
家电维修技术论坛
http://www.bjjdwx.com/forum.php
79
网络
http://www.79wl.com
