Before resorting to maintenance service, please kindly check by
yourself with the following chart.
-18-
Troubleshooting
No power
No sound
Luminance unsteady
or picture with noise
Key malfunction
Remote control
Doesn't work
Video cable isn't connected well
Disc is put upside down
The power cord isn't connected
Fuse melting
Audio cable isn't connected well
Audio setup isn't correct
Dirty disc
In fast forward or fast rewind mode
Anti-copy circuit influence
Without disc
Disc is bad
Dirty disc
There are menu on TV screen
Parental control is working
Power wave or other static interference.
Source select incorrect
TV video setup isn't correct
Doesn't work
Remote control is too far from DVD unit
Batteries are exhausted.
Player video setup isn't correct
Connect the power cord properly
Replace a same specification fuse!
Connect the DVD unit to TV directly
Select the suitable setup
Connect the cable properly
Connect the cable properly
Switch to the proper source
Select the suitable audio setup
Clean the disc
Load the disc
Load the disc properly
Clean the disc
Clean or replace the disc
Sometimes, the tiny distortion appears. It's normal
Use SETUP to turn off menu
Set up parental off or change the setup
Point the remote control at the sensor
Operate the remote control within 7m
Replace the batteries
Turn on/off the power and try again.
Select the suitable setup
Cause(s)
Can't locate any channels
in tuner mode
Connect antenna
Antenna is not connected
Source mode is not in tuner mode
Switch to tuner mode
Unable to play
Symptom
No picture
Distorted picture
Solution