5
Introduction
What’s In The Box
1. TV set
2. Remote control and batteries
3. User manual
4. Quick Start Guide
5. Stand
6. Screws for the stand
7. Power cable
Installing Remote Control Batteries
1. Open the battery cover.
2. Insert two AAA size batteries. Place the batteries with their terminals corresponding
to the (+) and (-) indications in the battery compartment.
3. Replace the cover.
If the remote control’s signal becomes weak or stops working, replace the batteries in the
remote control.
WARNING
: Batteries are a health hazard
– keep away from children. If batteries are
swallowed, seek medical attention immediately.
Using the TV Stand and Wall Mounting
The TV is provided with mounting holes for a VESA approved wall mounting bracket. Please
see the Specifications section for the VESA mounting bracket size and screw sizes
(mounting bracket and screws sold separately, not included).
Remove the screws holding the base to the base bracket and lift the base away (do not
remove the base mounting brackets). Mount the VESA bracket using screws. Do not use
screw s longer than required, otherwise you may cause damage to the internal components.
CAUTION
: Your new TV is heavy; please consult a professional wall mount installer to
perform this installation.
WARNING
: If you use the TV on its stand, use anti-tip furniture straps to fix it to the wall
and/or the entertainment cabinet, to prevent pets and children from causing it to fall over.
