User’
s Manua
l
15
Note: Subject to availability from the broadcaster.
3.8 Picture in Picture (PIP)
You can watch two channels simultaneously. The audio in main screen will be available.
1. Activate PIP Function
Select Main Menu ? Setting ? Common Set and press
OK
key to enter.
1. Highlight “PIP” and press
key to pop up a
drop-down list.
2. Select “On” and press
OK
key to confirm.
3. Press
EXIT
key to pop up a warning for
confirmation.
4. Select “OK” and press
OK
key to confirm.
5. A reboot prompt pops up on screen. Select “OK”
and press
OK
key to reboot or select “EXIT” and
press
OK
key to cancel the operation.
Notes:
•
You can also press ASPECT key to activate PIP function in AV setting window.
•
This function is unavailable when some information is displayed on screen, such as
channel list, detailed information, etc.
•
The modified setting only takes effect after restarting the receiver.
•
There will be no video output through RCA if PIP function is activated. In this case,
connect the unit to HDTV with YPbPr or HDMI cable and modify the setting to “OFF”.
•
The audio in main screen will be available
2. Display/hide PIP Window
Press
PIP
key to display/hide PIP window.
3. Swap PIP Window
You can swap main screen for PIP window by
pressing
SWAP
key.
4. Switch Channel in Main Screen
1. Press
OK
key to display channel list.
2. Press
keys to select a channel.
3. Press
OK
key to play it in main screen.
4. Electronic Program Guide (EPG)
In this guide, you can view program information for each channel based on date and time. In
addition, you can set timer events for recording or switch to a certain channel when a program
starts.
Select main menu ? Guide and press
OK
key to enter, or press
EPG
key to enter directly in
non-menu mode.