5 FIRST
INSTALL
Note: A Digital TV Antenna is supplied with the
TEAC DMB-T HD DIGITAL Terrestrial
Receiver. The Antenna should be used where the user is within an area with Digital Terrestrial TV
coverage but the premises in which the user intends to use the Receiver has not yet been upgraded
with Digital Terrestrial TV receiving capability. (Please refer to “Installation” for details.)
If you do not
know whether the building concerned has been upgraded with Digital Terrestrial TV receiving
capability, you may make relevant enquiries with your building management.
Please connect the Receiver to your television set (HDMI cable recommended) and that
the antenna is connected to the “ANT IN” input connector on the Receiver. Connect one
end of the IEC Power Cable to the Receiver and the other end to power supply. Switch
on your TV set and the Receiver.
When the welcome screen is displayed, please select the preferred language (English or
traditional Chinese) for the user interface and the country where the Receiver is used
(Hong Kong, China). Highlight “Set-up” on the Menu using the ‘UP/DOWN Arrow’ buttons
and press the “RIGHT Arrow” button to confirm your selection.
If you decide to use the Flat Panel Antenna, please turn ‘On’ the Antenna Power.
The Receiver will start to search for available channels and a few minutes are required to
complete this operation. When a TV channel is detected, its corresponding Signal
strength and Signal quality are displayed.
If channel scanning is completed successfully, a list of channels found during the
scanning process is displayed on screen.
8
