perform the Auto Search function. The Receiver may take approximately 3 minutes to
complete the Auto Search function and store the detected TV channels.
8.5 ANTENNA POSITION
This option allows the user to position the antenna in order to get an optimal signal.
There are two features:
Tuner Power: From the INSTALLATION screen, select Antenna position using the
UP/DOWN buttons and press the RIGHT button to enter to the Antenna position sub-
menu. Select Tuner Power and press the RIGHT button on the remote control unit. To
provide 5V power supply to the antenna, press the UP/DOWN buttons to highlight the ON
selection and press the OK button. To turn off 5V power supply to the antenna, press the
UP/DOWN buttons to highlight the OFF selection and press the OK button. Please note
that the antenna must support this feature, otherwise, please turn off the 5V power
supply feature.
RF Channel: This feature allows the user to select a known TV broadcast frequency in
UHF band. From the Antenna position sub-menu, select RF Channel and press the
RIGHT button on the remote control unit. Use the UP/DOWN buttons to select a known
TV broadcast frequency. Validate your selection by pressing the OK button or LEFT
button. Cancel your selection by pressing the EXIT button. When the selected frequency
carries a DTT signal, the Signal strength and Signal quality bar-graphs will indicate if
the antenna is well positioned. When the signal strength and quality reach an acceptable
level, the names of the detected channels are displayed. The user may position the
antenna until the Signal strength and Signal quality bar-graphs improve.
8.6 CHANNELS SETTINGS
This option allows the user to activate or deactivate TV and radio channels and select
automatic or manual updates of TV channels when the Receiver is restarted. There are
three features:
24
