8 INSTALLATION
8.1
INSTALLATION OF THE DIGITAL TV ANTENNA
Before installing the Digital TV Antenna, please check that the premises in which you
intend to use the Receiver has been upgraded with Digital Terrestrial TV receiving
capability (you may make relevant enquiries with your building management). If the
premises concerned does not have Digital Terrestrial TV receiving capability, you may try
to install the Digital TV Antenna supplied with the Receiver. To do this, connect the
Digital TV Antenna to the “ANT IN” input interface at the back panel of the Receiver.
Position the Digital TV Antenna near your window. In the MAIN MENU screen, select
Installation to display the INSTALATION screen. In the INSTALLATION screen,
select Antenna Position. In the Antenna Position menu, select Tuner Power and
press the RIGHT button on the remote control unit. Press the UP/DOWN buttons to
highlight the ON selection and press the OK button. Return to the INSTALLATION
menu by pressing the LEFT button and then select Auto search.
8.2 BASIC INSTALLATION
Press the MENU button on the remote control unit. Select Installation to enter the
INSTALLATION menu. The following options are available:
•
Manual Search
•
Auto Search
•
Antenna Position
•
Channel Setting
Press the RIGHT button to enter a sub-menu. Select an option using the UP/DOWN
buttons and then press OK button to confirm your selection. Press LEFT button to return
to previous menu or the EXIT button to cancel your selection.
To enter INSTALLATION menu, press the MENU button on the remote control unit, then
press DOWN button three times followed by the RIGHT button.
22
