Teac es8, Руководство пользователя

Страница: 60 / 69

Section 12 MISC MENU
In <MISC MENU>, the following operations related to the system setting of the main unit can be performed.
Item Detail
Back Light
Using the Right/Left key, set the time length of the backlight glowing when the key operation is done.
Contrast
Press
ENTER
to enter the next lower menu. And, control the contrast of the LCD.
Panel Beep
Using the Right/Left key, set the ON/OFF. In REC stand-by status, you can set whether or not to make the beep sound
caused by key operation.
Range Beep
Using the Right/Left key, set the ON/OFF. In REC stand-by status, you can set whether or not to make the beep sound
when the overrange condition occurs on recording.
Battery Beep
Using the Right/Left key, set the ON/OFF. You can set whether or not to make the beep sound when the battery is low.
LowBat.
Set the recording operations when the battery is low. Refer to 3.6. Confirming Supply Voltage and Operational
Settings for Low Battery .
Parameter
Press
ENTER
to enter the lower menu. You can save 5 patterns of settings information on the main unit. In this menu,
this setting information can be saved or loaded. And setting the parameter can be initialized.
Time Set
Sets the time setting. Refer to “3.5. Setting Date and Time”.
Comparator Check
Press
ENTER
to enter the lower menu. You can examine the comparator output.
GPS Information
Press
ENTER
to enter the lower menu.
GPS Data:
Shows the data such as time and location sent from the GPS unit.
TimeZone Set:
Sets the Local Time by inputting the difference in time from the World Standard Time.
Using the Right/Left key, choose
[JAPAN]
after
<TimeZone>
to set it to Japan standard time.
Lat./Lon:
decides whether or not to save the information of the latitude/longitude on the header file or on the CSV file in
the case of CSV recording.
Altitude:
decides whether or not to save information of the antenna altitude on the header file or on the CSV file in the
case of CSV recording.
Speed:
decides whether or not to save information of the speed on the header file or on the CSV file in case of CSV
recording.
Course:
decides whether or not to save information of the course on the header file or on the CSV file in the case of CSV
recording.
System Info.
Press ENTER to show the system information.
Power Supply
Press ENTER to show the voltage of the internal battery.
Refer to”
3.6. Confirming Supply Voltage and Operational Settings for Low Battery
.
CAUTIONS
When a PC is chosen as the storage destination, neither LATITUDE, LONGITUDE, ALTITUDE, SPEED nor COURSE is recorded.
Page 52