Teac es8, Руководство пользователя

Страница: 35 / 69

Section 6 Detailed Recording Setting
Setting of Physical Quantity Conversion Unit
The default setting of the physical quantity conversion unit on each channel is V.
A maximum of 8 characters is available for the physical quantity conversions unit when they are inputted from main unit.
1.
Press the Down key to move the cursor to <CH Unit>.
2.
Press [ENTER] to show the physical quantity unit configurations on each channel at
present.
3.
Press the Up/Down key to move the cursor to the channel you want to set and press
[ENTER].
The physical quantity conversions unit input menu will appear.
You can modify a character at the underscore bar. Press the Right/Left key to move
underscore bar and press Up/Down key to modify a character. Move the underscore
bar to
[
←
]
to change the item in the lower portion of the menu to
<BackSpace/ENTER>. And press [ENTER] to delete the input characters one by one
(Back Space).
4.
Make sure that the display shows <OK / ENTER> after finishing the input and press
[ENTER] to return to the physical quantity conversions unit input menu.
While continuing to hold [MENU] key, press [ENTER] key. The same settings can be
made on other channel simultaneously.
5.
Press the Up key to move the cursor to <OK>. And press [ENTER] to establish the
input and return to <SYSTEM MENU>.
Setting of the physical quantity conversion coefficient
The default physical quantity conversion coefficient (formula of AX+B) configured on each channel are as follows: coefficient A is 1 and coefficient B is 0. A
maximum of 10 digits (including symbols or decimal point) is available as input when they are inputted from main unit.
To convert recording numeral data to actual input voltage: The AD conversion value is an integer ranging from –32768 to +32767 and
the value would be ±25000 when the input is ±100% in the input range settings.
The actual input voltage = AD conversion value of the data file × SLOPE of the header file
1.
Press the Down key to move to <CH UnitChange>.
2.
Press [ENTER] to show the physical quantity conversion coefficient configured on
each channel at present.
Page 27