Teac es8, Руководство пользователя

Страница: 49 / 69

Section 8 Trigger Recording & Interval Recording
Settings of the trigger level
The trigger level is independent of each channel, and can be set by “Edge” or “Window”.
Edge Down
Edge Up
Trigger point
Trigger point
Trigger level set Trigger level set
Window Out Window In
Trigger level set
Hi
Trigger level set
Hi
Trigger point
Trigger level set
Lo
Trigger level set
Lo
Trigger point
トリガ収録の設定
1.
Press [MENU] to show <RECCOND MENU>, and choose [Trigger] by the Right/Left
key in <Mode> menu.
2.
Move cursor to <Setting>, and press [ENTER].
Make settings of the trigger condition for each channel.
“ OR ” or “ AND ” of channels for which the trigger monitor available can be specified as
the logic in order to detect the trigger. (Refer to
<Logic & Count>
as described later.)
3.
The trigger condition of each channel is shown as follows:
<IGNORE>: Not channel for the trigger
<Edge Up>: Trigger occurs when crossing the trigger level upward.
<Edge Down>: Trigger occurs when crossing the trigger level downward.
<WindowIN>: Trigger occurs when going in the High Low area.
<WindowOUT>: Trigger occurs when going out of the High Low area.
4.
Move cursor to the channel to make or change the setting, press [ENTER]. The
details of the setting menu of each channel will appear.
The trigger conditions can be changed by the Right/Left key when the cursor is located
in <Mode>. The menu, which is shown under <Menu>, changes according to the
trigger conditions.
5.
When [Edge Up/Down] is chosen, make the setting of <Level>. Move <Level>,
and press [ENTER].
In <NUMBER INPUT> menu, input threshold level as a form of % of input range. After
inputting, press [ENTER]. The display will return to the detailed setting menu. When
[Window] is chosen, make the settings of <Level Hi> and <Level Lo> as well.
Page 41