Teac DVS1000HD, Руководство пользователя

Страница: 29 / 32

TROUBLESHOOTING
If you experience problems with this Set Top Box or its installation
,
please read the relevant sections of this
and this Troubleshooting section carefully
.
User Manual
Problem Possible cause What to do
Standby light is not lit
Power cable is unplugged Check the AC power
connection
Power fuse is blown Check fuse
No signal or channels
found
Aerial is disconnected
Aerial is damaged
/
misaligned
Check aerial connection and
condition
Out of digital signal area Check with dealer
Sound but no picture
Tuned to digital Teletext
channel
Retune to another channel
Distorted or freezing
picture
Aerial may not be compatible Check aerial
Scrambled channel
message
Channel is scrambled Select an alternative channel
Forgotten channel lock
password
Retune channels to erase
channel lock
Unit is turned off Plug in power and turn unit on
Remote control not aimed
correctly
Aim remote control at the unit
Obstructions between remote
control and front panel receiver
Remove obstructions
Remote control batteries are
incorrectly inserted
Reinstall batteries according
to correct polarities
No response to remote
control
Remote control batteries are flat Replace remote control
batteries
Lost channel reception
after moving the unit to
another room
The aerial feed may come
through a distribution system
which may reduce the digital
signal now received by the
receiver
Try a direct feed from the
antenna
'Bad disc' is displayed Ensure the disc is not warped
,
damaged
,
stained or deformed
.
Ensure the disc format is compatible with the player
.
Please check whether you have tried to play a software CD
,
If
so
,
please restart the player
.
'No disc' is displayed Ensure that you have inserted the disc correctly with the right
side up
.
Ensure the disc is not distorted
,
stained or scratched
.
23