Teac DV-P50, Руководство пользователя

Страница: 19 / 20

- 18 -
SPECIFICATIONS
Unit
Power supply AC 110V ~ 240V ~ , 50/60Hz
Power consumption 13.5 W
Signal system Standard PAL
Laser Semiconductor laser, wavelength 650/780nm
Signal-to-noise More than 55dB
Harmonic distortion Less than 2%
Operating temperature 31°F to 95°F (-5°C to 74°C)
Operating humidity 5% to 85% (no condensation)
Video Output
Output level 1 Vp-p (75
Ω
)
Jack RCA jack
Audio Output
Output level 1.5V ± 0.5 Vrms (vol at maximium)
Jack Headphone jack
Specifications and external appearance are subject to change without notice.
TROUBLESHOOTING GUIDE
SYMPTOM CAUSE (AND REMEDY)
• The region number of the disc doesn't match the region number of this unit.
1 2 3 4 5 6
• Clean the disc.
• The disc is scratched.
The picture is not
clear
No picture
• Make sure that you select DVD mode.
• The system is in pause mode. Press the PLAY button to return to normal play mode.
• The unit is in fast-forward or fast-reverse mode. Press the PLAY button to return to normal
play mode.
• Make sure that AUDIO / VIDEO output connections are correct.
• The DTS DVD disc cannot be decoded to have speaker output.
• The unit is too hot, shut off the unit for 30 minutes to cool it down.
The remote control
does not function.
• Check that the AC adapter is connected.
• The unit is not turned on. No power.
DVD
No sound or only a
very low-level sound
is heard.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
• There is no disc inside ("No Disc" appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• A non-PAL disc has been inserted. The unit and disc region number are incompatible.
• Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
The disc does not
play.
Severe hum or noise
is heard.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace all the battery in the remote with new ones.