Installing PowerDVD Software
TEAC DVD-ROM Installation Guide
—
7—
Installing PowerDVD Software
PowerDVD is software that enables you to play DVD discs. To install the
PowerDVD software, insert the included CD-ROM that contains the PowerDVD
software into your computer’s CD-ROM drive (or the TEAC DVD-ROM drive).
If Auto-run is enabled on your system, the on-screen InstallShield Wizard will launch
automatically. If not, click the Windows
Start
button, then select
Run>D:setup.exe
,
where “
D:”
is the drive letter of the drive in which you inserted the PowerDVD CD-
ROM.
The Windows InstallShield Wizard displays the following panel:
Click the “Next” button, then follow the on-screen InstallShield Wizard’s
instructions to complete the installation.
The PowerDVD software features a graphic user interface that enables you to control
the playback of DVD discs on the TEAC DVD-ROM drive (see figure below).
Click the Help (?) button in the lower-right corner of the CyberLink panel to display
additional operational information.
Note:
Once the software installation is completed, you will be prompted to execute
the system diagnostic program. Select OK and make sure to enable DMA for the
TEAC DV-516E and any other drive that supports this function.
Help button
DVD 16X_short.fm Page 7 Wednesday, November 27, 2002 11:44 AM
