Recommended System Requirements
TEAC DVD-ROM Installation Guide
—
3—
Recommended System Requirements
❑
IBM PC-compatible computer, Pentium II 350MHz or higher
❑
An available 5.25 inch drive bay
❑
64MB of RAM (minimum)
❑
20MB free hard disk space
❑
Windows 98SE, Me, 2000, XP, or NT 4 Service Pack 5+
❑
Graphics accelerator with DirectDraw
❑
Sound card
Package Contents
❑
TEAC 16X DVD-ROM drive
❑
Audio cable
❑
Mounting screws
❑
CD-ROM disc containing Power DVD XP video player software
❑
TEAC 16X DVD-ROM Drive Installation Guide (this manual)
Configuring the DVD-ROM Drive
The DVD-ROM drive features five pairs of jumper pins on the rear panel. By placing
the jumper on the appropriate pair of pins, you can set the drive to Master, Slave or
CSEL mode.
The Master/Slave/CSEL jumper configuration of your TEAC DVD-ROM drive
depends on whether you already have an IDE CD-ROM or CD-RW drive installed in
your system. The following section will guide you through most typical system
configurations.
jumper
jumper
jumper
jumper
set to CSEL
set to Slave
set to Master
(default)
DVD 16X_short.fm Page 3 Wednesday, November 27, 2002 11:44 AM
