Teac CDW-D13, Руководство пользователя

Страница: 22 / 38

3 Test & Copy
14 TEAC Tower CD Duplicator User’s Manual
3 Test & Copy
The
Test & Copy
function performs the test simulation and the copy process in one
step.
The copy process is performed only if the simulation detects no problems. If the
simulation fails, the copy process is cancelled.
4 Verify
The
Verify
function verifies that the target disc was written completely and with
no errors.
5 Compare
The
Compare
function compares data on the source and target discs after the copy
process is complete.
6 Prescan
The
Prescan
function is performed on the source drive. This function scans the
disc to determine the maximum data/audio extraction speed.
7 Disc Info
The
Disc Info
function displays detailed information about the source disc,
including sessions, tracks, capacity, etc.
8 Select Source
The
Select Source
function enables you to select a drive (CD-ROM drive, CD
Writer drive, or hard disk drive) as the source from which to copy. You can select
a hard disk drive only on those Tower CD Duplicator systems that feature a
factory-installed hard disk drive.
Note: Unexpected termination or cancellation of a test will not affect a target
CD-R disc. The target CD-R disc will remain blank and available for use.
However, CD-RW discs that contain data may be damaged and the data they
contained may be rendered unrecoverable. It may be necessary to re-start the
CD Duplicator if the target drive hangs during a sudden termination.
Note: This function works only with data discs.