Teac CD-R-Dupli-4, Руководство пользователя

Страница: 23 / 34

51
ENGLISH
If there has been an error on the copying (i.e. the two CD-ROMs
do not match) or if they do not match in any other way (the wrong
pair of discs has been loaded), the compare operation will stop at
the point at which the mismatch was detected, and the display will
show:
3.4.1 Error conditions
If no disc has been placed in either the MASTER or the SLAVE drives,
the display will show a
No disc No disc
No disc No disc No disc
error message with the drive from
which the disc is missing.
If the master or slave disc is damaged, scratched, or is otherwise un-
readable, the display shows
Disc Err Disc Err
Disc Err Disc Err
Disc Err
, with either
Master Master
Master Master
Master
or
Slave Slave
Slave Slave
Slave
as appropriate. If the discs are different, the display shows a
No match No match
No match No match No match
message.
The compare operation can be stopped at any time by pressing and
holding down the MODE key and pressing the ENTER key. An error
message will be displayed and you should use the MODE key to return
to the mode selection.
Compare finished Compare finished Compare finished Compare finished Compare finished
No match No match
No match No match
No match
3. Modes