47
ENGLISH
This operation may take a minute or more, depending on the com-
plexity of the disc.
6.
When the finalization operation is complete, the display will show:
You can now remove the discs using the eject buttons on the drives
(these are disabled while the copy process is taking place). Alter-
natively, you can compare the original with the copy (see:
3.2 Test Write Mode
The test operation is functionally similar to the write operation, except
that the writing of data to the slave disc is simulated. This is useful to
make sure that data can be transferred at the selected rate between
the master and the slave discs.
1.
Press the MODE key until the display shows:
2.
Press ENTER
3.
Insert the disc into the disc tray (original in the MASTER, and the
blank CD-Rs in the SLAVE drives) and press the ENTER key. The
test operation continues in exactly the same way as the copy op-
eration described above.
Copy Complete
Copy Complete
Copy Complete
Copy Complete
Copy Complete
Mode select
Mode select
Mode select
Mode select
Mode select
2 Test write:12x
2 Test write:12x
2 Test write:12x
2 Test write:12x
2 Test write:12x
Test write:12x
Test write:12x
Test write:12x
Test write:12x
Test write:12x
Ready ?
Ready ?
Ready ?
Ready ?
Ready ?
Test Writing
Test Writing
Test Writing
Test Writing
Test Writing
36%
36%
36%
36%
36%
3. Modes
