
TECP-90-703 • Issue 1 • 8/2012
Page 5
© 2012 Tyco Electronics Corporation. All Rights Reserved.
3. Install guide strips (provided) on front and rear of chassis. To install a strip, align the tabs
on the strip with the slots on the chassis as shown in rear view in
Figure 3
, then press the
radius limiters into place as shown. Repeat for all four locations.
Figure 3. Installing Guide Strip On Standard Chassis
PRESS RADIUS
LIMITERS INTO
PLACE
24942-A
SIDE VIEW
SLOT
TAB
ALIGN TABS
WITH SLOTS