USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
50
PREPARING OF THE SUPPORT PLATE
Execute all the described operations with the
Printer turned off
.
Take the SUPPORT PLATE and pass it through the CARD STORE
REMIND
Make sure the CARD STORE is positioned correctly so that it will be well fixed to the screw A
and rest on the guides.
WARNING
To print in automatic MODE, always make sure to utilize the correct SUPPORT PLATE.
Pick up modules of cable tags and insert them into the Card Store.
Screw “B” to adjust space thickness under Card store, to allow just one item (eg. Wire marker card) to
go through and be printed.
REMIND
Card store shall not allow more than one item to pass at a time.
B
