USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
26
TURNING THE POWER ON / OFF
Turning the Power On
1) Ensure that the power cord is properly connected.
2) Press the (I) side of the power switch to turn on the printer. The power LED on the control
panel will light up.
3) After the printer performs internal tests and if no irregularities are detected, the online LED
lights and the printer is ready to print. If any item is loaded into the printer, the printer will detect
the leading edge of the article.
The following messages appear:
Turning the Power Off
1) Ensure that the printer is not performing any operation.
2) Press the (0) side of the power switch to turn off the printer.
NOTICE
Do not turn off the printer while it is printing, this will avoid any possible damage to the printer
head or ribbon cassette.
REMIND
To cancel the print and the related printing data, press the CANCEL Key for at least 3 seconds.
The item will be ejected.
REMIND
The printing Item has an external margin (top, bottom, right, left) of 2 mm.
The guaranteed printed Area has a maximum height of 54 mm and a maximum length of
496 mm.
The guaranteed printed area is centred in height between the top and bottom margin
PLATE PRINTER
Version
2.01
Ready
Plate
Printing
S-black
