TE-Group Guardo, Руководство пользователя

Страница: 16 / 137

16
GETTING STARTED
1. PLACE MICRO SD CARD
• Make sure an 8 GB Micro SD card (preferably from a known A-brand), Class 10
(UHS-I ) or higher with a minimum of 15 MB/s writing speed (optionally available
at www.guardo.be) is inserted into the Micro USB Card slot (10) before you start
using the Guardo Action Cam. See llustration III
• Make sure you f ormat the Micro SD card before first use only ! You can format the
micro SD card via:
o your computer (see p. 31 ‘connecting to a computer’ to find out how)
o the Guardo Action Cam app (see p. 21 ‘Full operation from app’ to find out how)
o your Full HD HDMI TV (see p. 32 ‘Connecting to a HD TV via HDMI Cable’ to find
out how)
See llustration III
Place the micro SD card into the Micro SD Card slot (10) and press gently with your finger
nail so that it clicks into place. (To remove the Micro SD-card: press the card gently again
with your finger nail so that it pops out).
Note:
• When there is no micro SD card inserted, the camera cannot be used!
• Make sure the capacity of your micro SD card does not exceed 32 GB, Class 10 (UHS-I).
2. TURNING ON/OFF
To turn the Guardo Action Cam on : Press the Power/Mode Button (6) for 3/4 sec. to turn
the Guardo Action Cam on. The LCD display (3) will show ‘ON’ and you will hear a short
beep indicating that the camera is turned on.
To turn the Guardo Action Cam off : Press the Power/Mode Button (6) again for 3/4 sec.
to turn the Guardo Action Cam off. The LCD display (3) will show ‘OFF’ and you will hear a
short beep indicating that the camera is turned off.
Note:
The Guardo Action Cam will turn off automatically when it is not being used for 5 minutes.
3. SETTINGS
The Guardo Action Cam can be set (resolution, video mode, photo mode, …) according to
the purpose for which it is used and according to your own preferences!
When the camera is turned on for the very 1
st
time, the following information will appear
on the LCD display, this is the default factory setting:
1. Video mode
2. Micro SD card inserted
3. Video resolution (1080P, 30FPS)
4. Remaining recording time
5. Battery status indicator
By pressing the Power/Mode Button (6) the settings can be changed in this order:
1. Video Mode (default) (1080P, 30FPS)
2. Video Mode (720P, 30FPS)
1
5